ITA-MED Posture Corrector TLSO-250

Product information: TLSO-250 Posture Corrector

ITA-MED Posture Corrector TLSO-250 is a device used to provide support to shoulders, back and abdominal area of body and improving posture. The Thoracic Lumbo-Sacral Orthosis, also known as “TLSO,” model number 250, is a device used to improve posture by supporting four key regions: the lower back, middle back, upper back, and abdominal area. The device’s creators suggest that it may be used to treat a variety of ailments, including scoliosis and other spine-related problems, as well as overall physique improvement.

The ITA-MED Posture Corrector TLSO-250, on the other hand, can be purchased without a prescription from several different internet retailers. The manufacturer currently offers their items at a wholesale level, which implies that you must buy one from one of their merchants to acquire one.

It’s vital to remember that, before using any medical equipment like the ITA-MED Posture Corrector TLSO-250, it’s critical to talk with your doctor.

About ITA-MED

The ITA-MED Posture Corrector TLSO-250 is manufactured by ITA-MED, a firm based in San Francisco, California. Shoulder braces, Back support, support belts, knee braces, and compression hosiery are just a few of the goods produced and sold by this firm. The company’s posture correctors are only one of the many product categories it creates, sells, and distributes.

The company has been in operating since 1992 as a private entity. The headquarters is currently under the leadership of Lev Tripolsky, who is said to be the company’s creator, president, and CEO.

The design and creation of “medically correct” items using natural, breathable materials that are pleasant to wear is a plus for ITA-MED Posture Corrector TLSO-250. Their website claims that their manufacturing plant is one of the most environmentally friendly in the world.

Fitting instructions

It is crucial to ensure that the ITA-MED Posture Corrector TLSO-250 is properly fitted before putting it on. To ensure a proper fit, we recommend that you follow the manufacturer’s instructions. The following seven step method will assist you in achieving an ideal fit:

  1. Remove the two vertical back aluminum supports and bend them to match the curve of your upper back. You may get specialized assistance from a medical professional to complete this stage. Place the support back into the posture corrector after they’ve been correctly adjusted.
  2. Remove any Velcro straps that may be linked to one another.
  3. Feed each arm into the corresponding shoulder strap after placing the posture corrector over your back.
  4. Place the brace against your back in the center, leaning slightly forward. Make sure the vertical supports are equally positioned on each side of your spine and that they are flat against your back.
  5. At the front, fasten the large elastic waist strap. Make sure you don’t over-tighten it.
  6. To increase comfort and provide further support, pull the smaller waist straps.
  7. Sit up straight with your shoulders back and the shoulder straps taut. Attach the Velcro closure system at the front to keep them together.
Remove-aluminum-stay-1024x922-1
https://www.posturebraceguide.com/wp-content/uploads/2014/12/Remove-aluminum-stay-1024×922.jpg
Putting-on-TLSO-1024x927-1
https://www.posturebraceguide.com/wp-content/uploads/2014/12/Putting-on-TLSO-1024×927.jpg
Closing-posture-corrector-1024x877-1
https://www.posturebraceguide.com/wp-content/uploads/2014/12/Closing-posture-corrector-1024×877.jpg
Tighten-extra-pull-1024x917-1
https://www.posturebraceguide.com/wp-content/uploads/2014/12/Tighten-extra-pull-1024×917.jpg
Fasten-shoulder-strap-882x1024-1
https://www.posturebraceguide.com/wp-content/uploads/2014/12/Fasten-shoulder-strap-882×1024.jpg

What’s it made from?

The manufacturer gives the following information regarding the materials utilized in the ITA-MED Posture Corrector TLSO-250 production:

  • 22% Cotton
  • 50% Polyester
  • 10% Lycra
  • 18% Nylon

Cost and sizing

Cost

Since ITA-MED is a wholesaler, it relies on an extensive network of retailers to sell its goods. They currently have over fifteen retail partners, including Amazon, Sears, Target, Walmart, and Walgreens, who sell their items.

The cost of a posture corrector will vary from one store to the next. The pricing will sometimes differ somewhat between the men’s, women’s, and pediatric versions.

$50 to $70 is the typical cost of a ITA-MED Posture Corrector TLSO-250, depending on where you buy from.

Insurance coverage

Some individuals choose to have their doctor prescribe a medical device that then bills Medicare, Medicaid, or a third-party insurance company using the Healthcare Common Procedure Coding System (HCPCS) rather than purchasing a ITA-MED Posture Corrector TLSO-250 out of pocket.

An HCPCS is a billing code that is used to identify a specific item or medical service.

To be eligible for coverage, a posture brace must fulfill specific criteria. Unfortunately, just a few items on the market are covered by insurance, including the ITA-MED Posture Corrector TLSO-250, SpinalQ, and the Bax-U.

The Men’s, Woman’s, and Pediatric posture correctors are all covered by HCPCS code L0627.

According to the Centers for Medicare and Medicaid Services, billing code L0627 refers to:

“A lumbar orthosis, sagittal control, with rigid front and back panels, and a posterior panel that extends from l-1 to below l-5 vertebrae, creates intracavitary pressure to relieve strain on the intervertebral discs. Straps, closures, padding, shoulder straps, pendulous abdomen design, pref.”

Available sizes

The company’s posture correctors now include the TLSO-250(M), TLSO250(W), and the TLSO-250(P).

Following the model number are the letters M, W, and P, which indicate the intended user: Men’s, Women’s, and Pediatrics. The sizes that each model is available in are as follows: Each comes in various sizes. When picking the correct size, make sure to measure the circumference of your body with a fiberglass tape measure. Place the measuring tape between your hips and waist when taking measurements.

TLSO-250 Posture Corrector Sizing

The company also sells a comparable product that does not include the ridged panels in addition to these sizes. The Medicare billing code that was assigned to these models is not available. The letter “s” is added to the end of each model number to distinguish it from the standard model. The model numbers for the Men’s, Women’s, and Pediatrics versions are TSLSO-250(M)(s), TSLSO250(W)(s), and TLSO-250(P)(s) for the Men’s, Women’s, and Children’s models respectively.

My experience

I’ve been dealing with bad posture for years and have only recently begun experimenting with posture supports to retrain my posture. I was inspired to test the ITA-MED Posture Corrector TLSO-250 after learning about it.

I’ll go through my four-week experience using this product in detail, then give you my personal opinion and advice after that.

The arrival and initial fitting

The TLSO-250(M) Large was the model I tried. The product was delivered folded within a zip-lock type bag with the usage instructions printed on the reverse side of the product labeling.

I removed the posture corrector and observed the design and craftsmanship of this item as I held it in my hands. In conclusion, it seemed to be a well-designed device and was comparable to something a doctor might prescribe. I took notice of the “Made in the USA” tag sewn into the lower bottom portion of the brace as I ran my hand down it. From the start, I was blown away by what I saw.

I began by removing the two aluminum back stays from their slots after reading the instructions quickly. It became obvious that installing this gadget on my own would be nearly impossible. In the end, I needed my wife’s help to bend the aluminum supports to match the shape of my upper back.

I discovered that removing my shirt made it simpler to bend the stays correctly to match my back. Remarkably, the stays were formed by placing them in the anticipated location where they would eventually be placed when the support was worn.

I slid the stays back into place and was ready to strap on the support after several minutes of fine-tuning them.

When I tried the ITA-MED Posture Corrector TLSO-250 for the first time, it felt a little like wrestling an octopus. The Velcro pads were sticking to everything in sight, and the straps were hanging everywhere. Another time, I had to enlist my spouse’s help in fastening this thing on. It was on and prepared to go as directed.

Putting it to the test

I decided to put the TLSO to the test for 28 days and see how well it worked.

On weekdays, I usually sit at a computer for many hours throughout the day while working. I’m in a lot of discomforts due to my poor posture during this period. Outside of work, I’m a moderately active person who enjoys spending time on his feet. Because of this, I’ll discuss my experience in two parts: at work and home.

The work test

ITAMEDTLSO250-1024x376-1
https://www.posturebraceguide.com/wp-content/uploads/2014/12/ITAMEDTLSO250-1024×376.jpg

When it comes to putting the support on, there’s a little bit of a learning curve; within the first two days of usage, I was able to work through the difficulty that I had when initially strapping on this posture corrector. It was simple to master once I got the hang of it. Putting it on and wearing it off was a cinch after that.

Because I often slouch when I’m not wearing a brace, sitting in the correct posture was rather foreign and unpleasant. However, after each day, I was rewarded with a significant reduction in back pain in the upper and lower regions. At the end of each working day, I took off the support to rest my back and abdominal muscles from sitting upright all day.

I would wear the brace underneath a button-up shirt on most days, but I’d occasionally wear it over a blazer. It was a bit tight at first, but it was comfortable to wear on a daily basis. I found the cloth sufficiently breathable when worn in a controlled environment.

When it came to giving extra support or relieving tension while switching between sitting and standing, the additional closure draws proved to be an attractive feature. Buttoning or Unbuttoning my shirt took a few seconds, and making adjustments to the waist band was very simple.

Leisure activities

I spent most of my time using this support while at work, but I tried it in various situations, from relaxing at home to doing physical activity.

The brace was most helpful for sitting activities. I observed that it offered strong support while still being flexible enough to do basic house chores. Overall, it was an excellent all-arounder for at-home usage, from cooking to yard work to cleaning to washing the car.

I discovered that while the fabric is breathable in normal situations, it holds moisture during rigorous exercise when it comes to physical activity. In other words, unless you are ready to wash and dry it after coming home, leave it at home before going to the gym.

Concealment

TLSO250concealed-1024x431-1
https://www.posturebraceguide.com/wp-content/uploads/2014/12/TLSO250concealed-1024×431.jpg

Another worry that some people may have is the product’s concealment. This product is advertised as being “unnoticeable under clothing.” This is true to a certain extent, but it’s essential to remember that some components, such as the shoulder belts and pads, are visible when worn beneath tighter fitting clothing.

Those who wear loser-fitting clothes should have no trouble hiding this support. It was barely visible beneath most of my professional clothing, but it showed through when worn under some T-shirts.

Overall thoughts and recommendation

Overall, ITA-MED Posture Corrector TLSO-250 has a fantastic product that is soft, efficient, sturdy, and well designed. I really liked the additional pull straps, which made it simple to provide extra support when needed (and less when not required), and the durable yet soft and comfy fabric made it easy to wear for long periods.

It’s a high-quality product that’s manufactured in the United States and available for a reasonable price.

While not ideal for a workout, it performed very well during all other daily tasks at home or at work.

It’s advantageous if you’re Medicare and Medicaid certified, as well as covered by a variety of major insurers. When compared to comparable product supports, it is very reasonable.

This is a product that I would strongly suggest if you’re looking for a product that will provide excellent shoulder and back support while also correcting your posture.

Here are some advantages and disadvantages to consider when deciding if this posture corrector is appropriate for you.

Pros

  • It’s quite light and comfy.
  • Well-engineered and well-designed
  • Available in various sizes to fit everyone – men, women, and children
  • Adjustment points allow for a precise fit.
  • Within a budget of $70 and under
  • In most situations, it’s not easy to detect.
  • Flexible
  • Made in the United States of America
  • It’s possible that it is covered by insurance.

Cons

  • It must only be washed by hand.
  • It is not suggested for extreme physical activity.

Do You Still Need Help Selecting a Posture Brace?

There are well over 100 different items available on the market right now, including posture supports and resistance trainers, biofeedback clothing, and other equipment. With so many to select from, selecting one that fulfills your needs may be challenging.

I compared the most popular posture braces to create this Posture brace comparison table, based on comfort, efficacy, and innovation criteria.

Leave A Reply

Navigate